Junkai tells you how to install stainless steel ball valve
Time : 2023-11-27 Visited : 105 次
Wenzhou Longwan Junkai Valve Factory is located in Longwan, China Valve City. It is a manufacturer specializing in the production of stainless steel valves. The main products are: stainless steel ball valves, stainless steel Y-type filters, stainless steel flanges, stainless steel mirrors, stainless steel gate valves, stainless steel stop valves, stainless steel check valves, etc.
Introduction to the installation steps of stainless steel ball valve:
1. First, clean the ball valve and pipes before installation to ensure that the surfaces are clean and free of dirt.
2. Align the flanges of the ball valve and the pipe respectively, connect them with flange bolts and tighten them one by one.
3. Apply a sealing gasket on the sealing surface between the ball valve and the pipe to ensure a smooth sealing surface and good sealing performance.
4. Connect the stem head of the ball valve to the operating device to facilitate the operation of the ball valve.
5. Check whether the installation of the ball valve meets the requirements, especially whether the flange connection is tight and the sealing is good.