Wenzhou stainless steel ball valve,Wenzhou valve,Wenzhou valve manufacturer-Wenzhou Junkai Valve

The maintenance and maintenance plan of stainless steel ball valve has been released! !

Time : 2022-10-18 Visited :  94 次

Wenzhou Longwan Junkai Valve Factory is located in Longwan, the valve capital of China. Is a professional manufacturer of stainless steel valves. The main products are: stainless steel ball valve, stainless steel Y-strainer, stainless steel flange, stainless steel mirror, stainless steel gate valve, stainless steel globe valve, stainless steel check valve, etc.
Today’s topic is about stainless steel ball valve, one of our main products. The principle of stainless steel ball valve is to make the valve unblocked or blocked by rotating the valve core. The stainless steel ball valve produced by Junkai Valve has the characteristics of simple structure, small volume, convenient operation and maintenance, and good sealing performance.
The maintenance and maintenance plan for stainless steel ball valves has been released! Take a look below:
1. After the rough finished product is pickled, it must be cleaned first. If sand holes or perforations are also found, gas shielded welding should be used for argon arc welding. It is then ground and then solution treated.
2. After the finished product is processed and tested for pressure, it should be rinsed with water with anti-rust powder added, so that it is not easy to rust in the process.
3. Try to pack in wooden boxes during transportation and avoid contact with metal products.
4. After the pipeline is installed, regular maintenance is required. Lubricating oil is often applied to the valve stem, and the valve can be properly opened and closed several times to prevent the inner ball, valve stem and sealing surface from being assimilated.
Pay attention to the above aspects, the stainless steel ball valve is not easy to rust and “strike”!
Our company has complete equipment, advanced technology and quality, scientific management, complete testing means, and has established a perfect quality assurance system. Equipped with advanced testing equipment such as physical and chemical analysis, mechanical properties, water, air pressure, flaw detection, etc., each process from raw materials to finished products is inspected by special personnel, forming a complete inspection process.
Junkai always pursues the tenet of “quality first, credit first”. To provide users with high-quality products and good and thoughtful after-sales service. Warmly welcome friends from all walks of life to discuss cooperation and create brilliance together!